The Prosig P8004 is an ultra portable, high quality, 24-bit data
acquisition system. It is compact, rugged and has 4 analog
inputs plus a dedicated tacho input. Input is via industry
standard BNC connectors. The size, tough packaging and low
power consumption makes it ideal for mobile use. Internally
there is comprehensive signal conditioning for voltage or IEPE
(ICP®) with programmable amplifiers, anti-alias filters and
transducer power, all controlled by the Prosig DATS™
software.
Maximum sampling rate is 100k samples/sec/channel at 24-
bits or 400k samples/sec/channel at 16-bits. Data integrity is
assured with a dynamic range of
102dB and a 120dB
noise floor. High
data transfer rates
are achievable, since the P8004 uses
USB 2.0 communications, which
operates at 480Mbits/s.
Don’t need many channels?
Want to start small and
upgrade later? Under tight
budget constraints? Then
the P8004 is an obvious
choice!
!
! 100k samples/second/channel (24 bits)
! 400k samples/second/channel (16 bits)
! DC, AC and IEPE (ICP®) inputs
! 16x over sampling tacho input
!
! 102dB dynamic range
! -120dB noise floor
! programmable threshold on tacho input
! Size : 50mm x 120mm x 240mm
2” x 4.7” x 9.4”
4 channel analog and 1 digital tacho input
Key Feature800
System
Signal Conditioning
Environmental
General
Analog inputs
Sampling rate
Tacho input and external trigger
Programmability
Resolution
Overall accuracy
Non-linearity
Sensitivity
Input voltage range
Input impedance
Analogue over voltage protection
Communications
Signal inputs
Gain
Anti-alias protection
Autozero
DC offset control
ADC
Noise Floor
Shock and Vibration
Operating temperature
Humidity
Weight
Consumption
Supply voltage
Connectors
Dimensions (H x W x D)
4 channels plus tacho input
Up to 100k samples/sec per channel (24 bit)
Up to 400k samples/sec per channel (16 bit)
Programmable ±20V
All features under software control
24 bit
±0.10% full scale
Less than 1LSB
(gain=1000) ±0.3μV (gain=1) ±0.3mV
± 10V
1Mohm
±24V
USB 2.0
Direct voltage
IEPE (ICP®) with TEDS
1 to 1000
>100dB
Signal autozero and amplifier autozero
±0.5 FSD in 32768 steps
24 bit ADC per channel
102dB
-120dB
Suitable for mobile use (10g)
0oC to +40oC (32oF to +104oF)
80% RH, non-condensing
1kg (2.2lbs)
<6W
Choice of 10-17V DC (e.g. vehicle
battery) or AC mains (adapter supplied)
BNC
50mm x 120mm x 240mm
(2“ x 4.7” x 9.4”)
GMT+8, 2024-5-9 20:28 , Processed in 0.031005 second(s), 15 queries , Gzip On.
Powered by Discuz! X3.4
Copyright © 2001-2021, Tencent Cloud.